VHP PUMP ATL1-7.5 and ATL1-15 are designed for light industry; with the small size and power, high water pressure, small diameter of jet distract, sharp and quick of cutting, it can be used in three-dimensional
station if equipped with robot, also used in plane station equipped with digital control.This cutting machine can feed a nozzle with ¦΅0.15mm and¦΅0.17mm.The equipment designed to apply in pure water cutting.
TECHNICAL PARAMETERATL1-15ATL1-7.5
General information
power15/207.5/10
Unladen weight (kg) 400300
Length (mm) 10001000
Width (mm) 700700
Height(mm) 10001000
Hydraulic system
Tank capacity 6060
Recommended oil ISO68ISO 68
Pump flow rate (1/mn) 4025
Working pressure (bar) 190190
Electrical supply
Voltage (VAC)400400
Current(A):Absorbed/protection35/4015/20
Frequency (HZ)5050
Water cutting
5 1/mn at 3 bars4 l/mn at 3 bars2 1/mn at 3 bars
Maximum flow rate (1/mn)1.50.8
Maximum wording pressure (bar)40004000
Low pressure inlet connection1919
VHP pressure outlet connection1/41/4
Lubrication
400/230400/230400 /230
Amperage (A) 0.40.4
Working pressure (bar) 1212
Air/oil exchanger (option)0.450.250.12
Voltage (V) 230230
Amperage (A) 0.520.26
Frequency (HZ) 50/6050/60
Water/oilexchangerWater cooling supply minimum flow Rate 10 1/mn at 1010 1/mn at 10
Sound level with air cooling1 m distance from the pump (dBA-Leq) 7575
Water filters2 low pressure filter5pand 1p5 p and 1p