1.One conversion kit includes:
a.Two xenon bulbs
b. Two ballasts
c.Other accessories
2.Ballast parameters:
General Parameters:
Operating Temperature:-40 to 105C
Steady State light Output: 3000 +/-200 lumens typical, bulb type dependant
Turn on light output: >70% at 2 secs, >85% 3 secs
Expected Ballast Life: >3500hrs
Radiated EMI Susceptifility: S95/54/EC
Radiated EMI Emissions: S95/54/EC
Cooling: Air cooled
Maximum Cable Cable Length:500mm
Output Wave Form: 125 +/-25Hz square wave
Stady State Output Power: 35W +/-3W
Open Lamp Circuit Protection:Latch off after 1 sec
Maximum Output Current: 8 A initial lamps on, 3 A next 2 secs
Maimum Output Power: 80W+/-17W
Steady State Output Volts: 85V +/-17V
Striking voltage:2300V
Flickering: (No flickering during steady status)
Electrical Input Parameters:
Steady State Input Voltage:9-16V
Max in Rush Current:15A@50ms,(8A at 2 secs). Decreasing to steady state within 30 secs
Max Steady State Input Power:45W (9 to 16V)
Input Turn on: 9V and abouv
Input Turn off: Below 8V
Reverse Voltage Protection: No damage to ballast with -40V
Conducted EMI Susceptibility: S95/54/EC
Conducted EMI Emission: S95/54/EC
Compact Size: 100*73*33
Weight: 0.41kg
Efficiency: Over 90% during steady status
3.Bulb parameters:
Color Temperature: 3000K 4200K 5000K 6000K 10000K 12000K
Output: 35 Watt
Starting Voltage: 23 KV
Luminous: 2800 LM +/-200 LM
Life: 3000 Hours
AS for H4 Hi/Lo lamps, the ray axis can be covtrolled forward and
backward for 4 mm, and up and down for 1.0mm.