Economical Force Gauge
The Series MG Digital Force Gauge is an economical solution for push and pull testing of up to 500 lb. A rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. Use the MG with a test stand and gripping fixtures to create a complete testing solution.
Compatible with all Mark-10 test stands and grips.
Small size
Reversible aluminum housing for hand use or stand mounting
Peak memory for tensile and compressive loads
Programmable automatic shutoff
Programmable default configuration
Push-button calibration
IPM - Intelligent Power Management system
Selectable units of measurement
Battery or AC operation
Same housing size for all capacities
Specifications:
Accuracy: ¡À 0.5% of full scale ¡À1 digit
Sampling rate: 30 readings/sec
Safe overload: 150% of capacity
Battery life: 30 hours of continuous operation
Weight: 0.7 lbs (0.3 kg)
Environmental requirements: 5 ¨C 45 deg. C, <96% humidity (non-condensating)
CE mark
Specifications:
ModelCapacity x resolution
MG0120.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N,
MG0250.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N,
MG050.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N,
MG22 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N,
MG55 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N,
MG1010 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N,
MG2020 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N,
MG5050 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N,
MG100100 x 0.1 lb, 50 x 0.05 kgF, 500 x 0.5 N,
MG200200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N,
MG500500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N,