GasAlert100
H2S or CO
100 Day Disposable Gas Detector
With 100 days of continuous operation from the day of activation, the GasAlert100 is a practical and cost-effective solution for short term work projects. Enjoy 100 days of maintenance-free operation with no calibration, no sensor replacement, and no battery
replacement or charging.
Protect Yourself
Continuous, alphanumeric LCD shows detector life remaining, alarm setpoints and advises self-test status
Records and displays the peak alarm encountered and time
elapsed since the event occurred
Two alarm levels (Low/High)
Wide-angled visual alarm bar visible from all angles
Provides 95 dB (typical) alarm tone
Compact (1.0 x 1.45 x 2.3 in. / 26 x 37 x 58 mm) and lightweight (1 oz. / 30 g)
Full function self-test of audible/visual alarms plus integrity of sensor, battery and circuitry
Continuously on¡ªone button activation and test
High-tension stainless steel pocket/belt clip
Instructions in local languages included
Ordering Information
GA100-H 100 day H2S detector
GA100-M 100 day CO detector
Note: Models above are available with special alarm setpoints.
Accessories
GA-TS04 GasAlert100 automatic test station
GA-HC-1 Hard hat clip
GA100-CDT Interactive product demo CD-ROM
The GasAlert100 is a practical, cost-effective solution to short-term work projects. The GasAlert100 provides 100 days of continuous, maintenance-free operation from the day of activation. Operated by an advanced microcontroller and electrochemical sensor, the GasAlert100 is equipped with two levels of alarm and a continuous, alphanumeric LCD.
Simply press the START/TEST button and the GasAlert100 is ready for use. The life
remaining is displayed in days and then hours. The full function self-test verifi es
sensor, circuit and battery integrity and audible/visual alarms. Alarm setpoints are
displayed on command.
The rugged, compact GasAlert100 is designed with the most advanced RFI
protection available in the industry today. Simply clip the instrument to your lapel, pocket, belt or hard hat for unequalled protection.
SPECIFICATIONS
DETECTOR: Disposable, zero-maintenance gas detector
Model:GasAlert100 COGasAlert100 CO
Operational life1:100 days100 days
Sensor range:0-100 ppm0-300 ppm
Low alarm level2:10 ppm35 ppm
High alarm level2:15 ppm200 ppm
Operating temperature:-22 to +113¡ãF
-30 to +45¡ãC+5 to +113¡ãF
-15 to +45¡ãC
Calibration:Not required
1 Given 3-5 minutes of alarm per day in normal operation
2 Customer special alarm settings available
Continuously on:Yes
One-button control:Activation and self-test
Full function self-test:Verifi es sensor, circuitry and battery integrity and audible/visual alarms
Sensor:Electrochemical cell (temperature compensated)
INDICATORS AND ALARMS
Visual gas alarm:Flashing, wide-angled alarm lens with dual red LEDs plus ALARM LCD readout
Audible gas alarm:Pulsing siren 95 dB at 1 ft./0.3 m (typical)
Failure alarm:Yes (audible/visual)
Self-test pass:Yes (audible/visual)
Other:End of life (audible/visual)
CONTINUOUS LCD DISPLAY:Alphanumeric status panel LCD advises:
Gas monitored:H2S or CO
Life remaining:Continuously displayed in days and then hours
Two alarm levels:LOW alarm / HIGH alarm
Peak alarm levels:Records and displays peak alarm exposure, and time elapsed (up to 24 hr)
Alarm setpoints:High and low (displayed on demand in ppm)
Self-test status:Advises to ¡°TEST¡± and when the self-test is passed ¡°?¡±
TESTS
Full function self-test:On demand, as often as once every 20 hours and on activation
Battery:Every two hours (auto)
GENERAL SPECIFICATIONS:Impact-resistant ABS enclosure
Ingress Protection:IP65
Humidity:5% to 95% RH (non-condensing)
EMI/RFI:Complies with EMC Directive 89/336/EEC
Battery:Lithium, non-replaceable
Size:1.0 x 1.45 x 2.3 in. / 26 x 37 x 58 mm
Weight:1 oz. / 30 g
WARRANTY:100 days from activation plus 1 year shelf life