Water Still 4000X and 8000X
The 4000X and 8000X are fully automatic, vertical boiler water stills, producing 4 and 8 litres/hr of ultra-pure pyrogen-free distillate, from any potable tap water supply. They are simple to operate and easy to clean.
Water flow rate automatically set and maintained
Automatic switch-off of water and heaters when distillate reservoir is full
Flowswitch automatically switches off heaters should water flow fall to an inadequate level
Borosilicate glassware and silica sheathed heaters
Fireproof toughened glass door
Boiler protected by external, independent thermal cut-out
Attractive zinc-plated steel casing has excellent corrosion resistance
Compact design, for bench or wall mounting
Specification
4000X8000X
Distillate output, litres/hr48
Conductivity, ¦Ìs/cm?0.20.2
Minimum water supply pressure, kg/cm20.30.8
Water consumption, litres/hr60120
Dimensions (hxwxd), mm overall510x290x200780x350x240
Heaters, kW3x14x1.5
Weight, kg10.518.5
Electrical supply
13 amp
230/240V, 50/60Hz27 amp
? Conductivity at 25¡ãC with dissolved CO2 removed from distillate. Any ultra pure water in contact with the atmosphere has a conductivity of 1-2 ¦Ìs/cm and pH ?5, due to a small amount of CO2 (0.5ppm) absorbed from the atmosphere. Deionisers and similar systems measure conductivity before the water contacts the atmosphere and absorbs CO2 (during collection and use). As distillates are already open to the atmosphere before measurements can be made, it is necessary to remove this CO2 to provide a comparable conductivity value.
Materials
CasingZinc coated steel
FinishStove acrylic
HeatersSilica
BoilerBorosilicate glass
CondenserBorosilicate glass
Cat. No.Description
703-001Water Still 4000X 4 litre/ hour vertical boiler water still
703-007Water Still 8000X 8 litre/ hour vertical boiler water still